Automation for doors with seals, where the wing provides for partial seal (on 2 sides), with a specially designed guard.
This automation is similar to the previous one, but with greater carrying capacity.
This automation is hermetically sealed on all four sides, and the wing – on closing – drops and slides to compress the seal against the jamb along the perimeter.
HPL laminate and AISI 304 stainless steel laminate panels
Wing for sliding door consisting of rounded extruded aluminium frame and panel. Wing thickness 60 mm with non-toxic silicon perimeter seals. The external profile is perfectly flush fitting and sealed with non-toxic silicon.
The internal panel consists of a sandwich of two HPL laminate plates, plus two 5 mm thick MDF class 1 fireproof panels and an extruded high-density self-extinguishing polyester sheet.
The panel can be surfaced with melamine laminate or AISI 304 stainless steel laminate in Scotch Brite finish.
Wing for sliding door made entirely of press-formed AISI 304 satin stainless steel in Scotch Brite finish, 60 mm thick, featuring a very wide radius and non-toxic silicon perimeter seals.
The interior of the wing is reinforced with polyurethane foam.
The frame is made of AISI 304 satin stainless steel in Scotch Brite finish to cover the ridge of the sliding doors.
The frame has a U-section, which also features a very wide radius, and is made in three pieces.
Framed wing with double glazing
Wing for sliding door consisting of rounded extruded aluminium frame and double glazing. Wing thickness 60 mm with non-toxic silicon perimeter seals.
The wing profile is equipped with a purpose-designed adapter which allows for the glazing to be fitted and clicked and secured in place with purpose-provided glazing beads.
The dimensions envisaged are accomplished using two plates of 3+3 transparent laminated accident-proof glass 3+3 with an intermediate chamber of 20 mm.
dedicated frames ensure the entire system is sturdy and reliable.
The rounded profiles (in both aluminium and stainless steel), the panels and the inset windows flush with the exterior without any ledges prevent the build-up of dirt and make for easy cleaning and improved hygiene.
The frames are equipped with silicon seals (non-toxic).
These seals (where envisaged) are inset into the wing without any additional profiles. This enhances the attractive styling while providing more efficient cleanliness and hygiene.
The floor runner was also designed to cover the fixing screws and not only to improve the appearance but also to ensure easier cleaning.
Indeed, it prevents the build-up of dirt on the screws and is easier to clean.
For further details: please refer to the DITEC price list.